RC-5 Infrared Remote Control Kits Return to Main Menu
RC-5 Infrared Remote Control Kits
The RC5PMD Infrared Remote Control Kit allows the
user remote control access to the Marantz Professional
line of commercial recorders and playback units.
Each Kit Consists of the Following Items
One IR handset controller.
One IR receiver eye (requires an RCA cable to
connect the eye to the Marantz RC-5 input on the
One +9VDC AC Adapter.
Two mounting options (a 1U rack panel and a single
gang wall plate).
By mounting the receiver eye in the supplied 1U rack
panel above the Marantz deck, operation is possible by
aiming the IR handset at the rack--just as if the IR control
was built into the unit.
By mounting the receiver eye in a single-gang wall box
and covering it with the supplied wall plate, the Marantz
deck can be installed in an out-of-the-way location and still
utilize the IR remote control. The Marantz unit can even be
in a separate room up to thirty feet away without the need
of additional signal boosting or distribution. This makes
the Infrared Remote Control ideal for houses of worship,
auditoriums, or board room operations, where the machine
must be controllable, but out of sight.
Low-cost, high-quality realtime duplication systems can be
created with several PMD500s or PMD520s. Simply daisy
chain the RC-5 control signals using standard RCA cables.
Recording on all tape wells simultaneously is possible with
the push of a single button on the IR handset.
RC5PMD: For use with Marantz models PMD500,
PMD510, or PMD520.
RC5PMDSW: For use with Marantz models PMD320,
PMD321, PMD350, PMD501, or PMD502.